The Airflow Sensor is designed for systems that generate heat in the course of their operation and a steady flow of air is necessary to dissipate this heat generated
This device is meant to measure the presence or absence of airflow.
Product Code: AFS00
Powered by the base unit
The AKCP Pro airflow sensor is designed for systems that generate heat in the course of their operation and a steady flow of air is necessary to dissipate this heat generated. System reliability and safety could be jeopardized if this cooling airflow stops.
The Airflow sensor is placed in the path of the air stream, where the user can monitor the status of the flowing air. The airflow sensor is not a precision measuring instrument. This device is meant to measure the presence or absence of airflow.
In addition to the sensor's ON or OFF status, the airflow sensor's condition can also be read via an SNMP get using its OID. SNMP traps are sent when critical. SNMP polling via get available. Web browser interface available. When an alarm condition is activated the description and location of the fault can be sent via email, page.
This is not a precision sensor, it is ONLY designed to sense the presence and non-presence of airflow and not to measure the amount of airflow. It is best used to send an alert in the case of a fan, AC failure, or when airflow is present when it should not be.
On/off alarm signal of airflow
Accurate, cost effective flow sensing
Operates from a single +5 V DC Power Supply which powered by the sensorProbe
2 LEDs indicate the status of Airflow and that the sensor is securely plugged into the sensorProbe
Electronics mounted in a small plastic case
sensorProbe auto detects the presence of the airflow sensor
Up to 2 airflow sensors per sensorProbe2, 8 per sensorProbe8 and securityProbe
Full autosense including disconnect alarm
Data graphically displayed via a web page
AFS00 can be extended to your desired cable length using one of our CAT5 extension cables, CABXX, or you can provide your own cable of any length up to 60 feet