Modbus Adapter
MOD-A |
Convert the MOD/EXP port on the sensorProbeX+ and sensorProbe2+ from an RJ45 into 2 wire serial cable.
sensorProbeX+ comes equipped with an RS485 Modbus and Expansion port. When using this RJ45 port to connect Modbus appliances, the Modbus to SNMP Adapter makes it easier to connect a 2 wire serial bus cable to the RJ45 port, converting the RJ45 connector into a 3 pin terminal block connection.
Product Code: MOD-A
>LED Status indicator
Connector | 3 pin phoenix connector : A+, B+, GND |
Electrical | no galvanic isolation |
Components | Manufactured using highly integrated, low power surface mount technology to ensure long term reliability. |
Operating Environment | Temperature : Min. -35° C – Max.80° C Humidity: Min. 20% – Max. 80% (Non-Condensing) |
|
|
Interface |
|
Communications cable | RJ-45 jack to sensor using UTP CAT5e/6 cable |
Power source | Powered by the controller unit. No additional power needed |
Power Consumption | Typical 0 mWatt, 0 mA |
Maximum Cable Length | The Modbus Adaptor can be extended from the RJ-45 Intelligent Sensor ports on the base units up to 1800 feet, or 550 meters using standard CAT5/6 LAN cable |
Dimensions | 56 x 55 x 33.3 mm |
Mounting | DIN rail mounting Screw mounting |